Yard Machines 665 Lawn Mower Manual

The Yard Machines 665 is a reliable and efficient lawn mower designed for residential use. It features a powerful engine, adjustable cutting heights, and a durable construction to ensure a well-manicured lawn. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 21-inch cutting deck, adjustable height settings, 4-cycle engine, and ergonomic handle design.

Installation

Unpack the mower and check all components. Assemble the handle and attach the grass bag.

1. Attach the handle: Align and secure with provided screws.
2. Install the grass bag: Ensure it fits snugly onto the rear of the mower.
3. Check oil level: Fill with the recommended oil type if necessary.
4. Fill with fuel: Use fresh gasoline for optimal performance.

WARNING! Always follow safety precautions when handling fuel and sharp blades.

First-Time Setup

Before starting the mower, ensure all components are securely attached and check the oil and fuel levels.

1. Check the oil: Ensure it is at the correct level before starting.
2. Fill the fuel tank: Use unleaded gasoline only.
3. Adjust cutting height: Set to desired level for your lawn.
4. Start the mower: Follow the starting instructions in the manual.

CAUTION! Always start the mower on a flat surface and keep hands away from the blades.

Specifications

• Engine Type: 4-cycle, gas-powered.
• Cutting Width: 21 inches.
• Cutting Heights: 5 adjustable settings (1.5 to 4 inches).
• Grass Bag Capacity: 1.5 bushels.
• Weight: Approximately 60 lbs.
• Fuel Capacity: 1.5 quarts.
• Oil Capacity: 0.5 quarts.

Controls and Settings

Familiarize yourself with the controls: throttle, choke, and start/stop switch.

Throttle: Adjusts engine speed for different mowing conditions.

Choke: Used for starting the engine in cold conditions.

Start/Stop Switch: Controls the operation of the mower.

Connecting Devices

Ensure all connections are secure before operating the mower.

1. Check fuel and oil levels before each use.
2. Inspect the blade for sharpness and damage.
3. Ensure the grass bag is properly attached.

Tip: Regular maintenance will prolong the life of your mower.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

1. Start the mower: Follow the starting procedure outlined in the manual.
2. Mow in straight lines: Overlap each pass for an even cut.
3. Adjust speed as needed: Use the throttle to control engine speed.
4. Stop the mower: Use the stop switch when finished.

WARNING! Keep hands and feet away from the cutting area while operating.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check and change the oil regularly.
2. Sharpen the blade at least once a season.
3. Clean the mower after each use to prevent grass buildup.
4. Inspect and replace air filters as needed.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

• Wear appropriate footwear and eye protection.
• Keep children and pets away from the mowing area.
• Do not operate on wet grass to avoid slipping.
• Always be aware of your surroundings while mowing.

Troubleshooting

Reset: Refer to the manual for troubleshooting steps.

Service: Contact customer support for further assistance.